Rohner Dust Collectors are not your average material air separator. Rohner collectors come with an exclusive air flow management system guaranteeing consistent safe airflow through the filter loading cycle. With an optional energy saving standby mode it has the ability to sense a pause in process and reduce the air volume resulting in increased filter life and energy savings.

STANDARD FEATURES PROVIDED IN ROHNER DUST COLLECTORS INCLUDE:

  • Electrogalvanized steel powder coated for maximum corrosion resistance
  • Factory mounted high efficiency direct drive blowers
  • Rohner automatic variable speed VFD motor control.
  • 99.9% efficient abrasive resistant filters
  • Factory piped automatic back pulse with down time cleaning
  • Drum adapter kit with manual slide.
  • Down-Flow Cartridge
  • Automatic Back Pulse Cleaning
  • NEMA 12 Dust Tight Industrial Control Panel.
  • 55 Gallon Waste Drum Kit

Rohner Paint Spray Booths are designed to meet or exceed NFPA33 and IFC Chapter 24 requirements. View Requirements.

Rohner- Depaint Dust Collectors
Dust Collectors
Dust Collectors
Dust Collectors
Dust Collectors

SPECIFICATIONS FOR DUST COLLECTORS

Std. Opt Std. Opt
12 gauge housing with structural reinforcement powder coated prior to assembly Integral media drop out box for blast applications
Double urethane sealed factory assembled seams HEPA final filters plenum, with filters
Direct drive aluminum airfoil, spark resistant blower /td> UL 508 listed NEMA 12 panel: VFD variable volume, automatic and back pulse timer board. (pre-wired)
TEFC 3-phase, 60hz high efficiency motors Quick acting pneumatic back pulse solenoids, 90 PSIG manifold with safety valve
55 gallon waste drum kit with manual slide gate Panel mounted Magnehelic *
VFD motor drive control Explosion vents, rotary air locks, spark detection and blow back damper for combustible dust applications
Dual dimple pleated spunbond, 99.9% @ 10 micron efficient cartridge filter Autosense energy saving mode with constant volume control and ultra cleaning mode.

*Magnehelic is a registered trademark of Dwyer Instruments, Inc.

APPLICATIONS FOR DUST COLLECTORS

Cabinets & Furniture

Cabinets & Furniture

Dust Collectors are commonly utilized in cabinet and furniture shops to provide efficient dust collection and long filter life by containing fine dust particles.

Sanding Enclosures

Sanding Enclosures

Sanding Enclosures are often paired with dust collectors when stripping old finishes or coating new products. The are an effective way to manage fine dust particles with out constant filter changes that would occur in a traditional open face.

Blast Room Ventilation

Blast Room Ventilation

Dust Collectors can work with Abrasive Blasting Enclosures to effectively capture dust and particles, while prolonging filter life.

SIZING FOR DUST COLLECTORS

MODEL W H D CFM SP (in WC) Primary Filters Air:Cloth* Ratio # DC Motor HP Compressed Air** (SCFM @ 90PSI)
DC12000 5'-7" 19'-5" 14'-6" 12000 6" 18 2.6:1 1 20 18
DC24000 11'-2" 19'-5" 14'-6" 24000 6" 36 2.6:1 2 40 36
DC36000 16'-9" 19'-5" 14'-6" 36000 6" 54 2.6:1 3 60 54
DC48000 22'-4" 19'-5" 14'-6" 48000 6" 72 2.6:1 4 80 72
DC60000 27'-11" 19'-5" 14'-6" 60000 6" 90 2.6:1 5 100 90
DC72000 33'-6" 19'-5" 14'-6" 72000 6" 108 2.6:1 6 120 108
DC84000 39'-1" 19'-5" 14'-6" 84000 6" 126 2.6:1 7 140 126
DC96000 44'-8" 19'-5" 14'-6" 96000 6" 144 2.6:1 8 160 144
DC108000 50'-3" 19'-5" 14'-6" 108000 6" 162 2.6:1 9 180 162
DC120000 55'-10" 19'-5" 14'-6" 120000 6" 180 2.6:1 10 200 180
GET A QUOTE

CONTACT US